How To Repair Your Window Screens

Step 1: Remove the Old Screen

Start by removing the old screen from the window frame. You can do this by pulling the screen out of the frame or by cutting it along the edges with a utility knife. If the screen is stuck or stubborn, you can use a flathead screwdriver to pry it loose. 

Step 2: Measure the Window

Measure the width and length of the window frame to determine the size of the new screen. Make sure to measure the frame itself, not the glass.

Step 3: Cut the New Screen

Cut the new screen material to the measured size using a utility knife or scissors. Make sure to cut it slightly larger than the frame to allow for stretching and securing.

Step 4: Install the New Screen

Starting from the top of the frame, attach the new screen to the frame using the rubber spline. Work your way down the frame, stretching the screen tightly as you go. Use a screen rolling tool to help stretch and secure the screen.

Step 5: Secure the Screen

Once the screen is attached, use a utility knife to trim the excess material around the edges. Make sure the screen is tight and secure to prevent insects and debris from entering.

Step 6: Replace the Window Frame (if necessary)

If the window frame is damaged or worn out, replace it with a new one. Make sure to measure and cut the new frame to fit the window perfectly.